Click to return to main page

Used & Ex-Rental Gear For Sale

Over the years, our Production Department has acquired all manner of stuff that we need to dispose of. Items ranging from white boards, to easels, strange lights, to flooring. Have a browse through our used items section, and see if anything takes your fancy. All items are guides, and are negotiable, so don't be afraid to ask!

Please email Martin or Ninko with your enquiry...

Allen & Heath WZ20:8:2

Used Price
AED 3,000


The Allen & Heath MixWizard WZ20:8:2 is a compact 8-track console for project studios and location recording. The connector panel can be rotated for desktop or rack mounting.

Key Features
* 8 mic/line inputs with -20dB pad, 4 band EQ with sweepable mids and in/out switching, 6 aux sends, pan, channel on switch, peak led, PFL switch, routing switches and 100mm fader. +48V phantom switchable globally
* 6 stereo channels with -10dB / +4dB sensitivity switching, 2 band fixed EQ, 6 aux sends, balance, channel on switch, peak led, PFL switch, routing switches and 100mm fader
* 8 tape returns with routing to auxes 1-2 and 6, pan, level, PFL switch, PFL led and tape rev switch
* 6 aux sends, 1-2 (cue) fixed pre fade, 3-4 pre/post switchable, 5-6 fixed post fader.

Allen & Heath WZ20S

Used Price
AED 3,000

The WZ20S was a truly ‘customer-led’ project. A&H were getting a lot of emails and calls from small broadcast outfits, keyboard fanatics and hire companies who had lots of stereo sources to mix, but couldn’t find a good quality console that could do the job without costing an absolute fortune.
They couldn’t resist a challenge like that, so a few months later, WZ20S was born. As well as accommodating an incredible 40 inputs to 2 independent mixes, this ‘Wizard can be tailored for the job with a host of options like fader-start and turntable inputs.

Behringer B-2

Used Price
AED 400
The B-2 PRO is a high-performance dual-diaphragm studio condenser microphone. Its perfect for Vocalists and recording studios, even Live applications. The B-2 PRO provides a slightly pronounced 12 kHz range, producing the kind of “presence” that often eliminates the need for high-frequency EQing that would raise the overall noise floor. It provides that much-desired transparency that can only be found on high-end large-diaphragm condenser mics. Key features include selectable cardioid, omnidirectional or figure-eight directivity pattern. The low-cut filter removes distracting low-frequency sounds, and built-in shielding minimizes high-frequency interference. A 10 dB attenuator can be used with high volume signal sources. It comes with a hard case, a suspension mount and a windscreen.
Behringer Xenyyx 2442FX
Used Price
AED 700
The XENYX 2442FX has 24 inputs and 4 Aux Sends for each channel. Additionally, 4 subgroups with separate outputs have been incorporated for routing flexibility. The new XENYX Mic Preamp matches the sound quality, transparency, headroom and even the dynamic range of boutique-style, stand-alone mic preamps. Neo-classic "British" EQ brings back the warmth and musicality of those '60s and '70s mega-console desks that made music history. The XENYX FX mixers incorporate a new studio-grade 24-bit FX processor. Get 100 real-world and awesome effect presets at your fingertips.
BSS Audio Opal FCS-966
Used Price
AED 2,500
BSS Audio provides the Opal FCS-966 Constant Q Graphic Equalizer with separate LF and HF contour filters that can change an overall sound balance without disturbing a detailed room or loudspeaker response.
It has 2x 30-band graphic EQ with automatic fader bypass, 12dB HP filter (controllable up to 250Hz), 2x contour filters (6dB LF/HF shelf), gain, switchable VU meter, balanced in/out (XLR/jack). Dimensions: 19” x 3U.
DBX 166 XL
Used Price
AED 770


The 166XL is a dual channel/stereo compressor/limiter. It provides two channels of noise gating, OverEasy or classic hard knee compression and PeakStop limiting, with complete control of signal dynamics for studios, sound reinforcement companies and musicians. When using the Attack and Release controls, artists and engineers will find that the center settings deliver classic dbx compression, while the full control range produces effects that extend from slow leveling to aggressive peak limiting. The unit's advanced gate circuitry uses a new, program-dependent timing algorithm to produce ultra-smooth release characteristics, even with complex signals such as voice or reverb decays.
Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup, while the 166XL's intuitive operation lets users easily smooth uneven levels, add sustain to guitars, squash drums or tighten up mixes. In Stereo Couple mode, channel 1 controls become the master controls, and channel 2 follows precisely to ensure a rock solid stereo image, even with high amounts of compression, through True RMS Power Summing.
DBX 1046 Compressor/Limiter
Used Price
AED 1,050

The dbx 1046 Quad Compressor Limiter is designed to provide the audio professional with 4 channels of great sounding dbx compression. Smooth classic dbx OverEasy or hard knee compression perfectly suited for use on individual tracks of your multitrack recorder. Separate channels can be individually interfaced and used for entirely independent purposes. PeakStopPlus protects your system from violent peaks that can KO your P.A. or studio monitors. Each channel features threshold, OverEasy or hard knee compression, ratio, input/output meter, output gain, hard-wire bypass, stereo link, balanced gold-plated XLR and 1/4" inputs and outputs, and switchable +4dBu or -10dBV operating level.
DBX 1074 Quad Gate
Used Price
AED 1,050



The dbx 1074 QuadGate is based on the legendary dbx V2 VCA and offers 4 channels of gating with threshold, depth, and release controls on each channel. It has gold-plated, balanced XLR and 1/4" inputs and outputs, and 1/4" key inputs. An internal filter can be independently activated and controlled on a channel-per-channel basis, allowing you to clean up tracks and have frequency selective control on each gate.
DBX 260 Drive Rack
Used Price
AED 2,850


 

The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control.
DBX 480 Drive Rack
Used Price
AED 7,000
The 480 includes 4 inputs and 8 outputs which can be tailored for any configuration. By including every form of processing necessary to drive the signal from the mixer to the power amps, such as pre-crossover EQ, notch filters, speaker delay, multiple crossovers, speaker compensation equalizer, driver alignment delay, and compression/limiting, the 480 is truly the only box you'll need for any sound system application. Two real time analyzers can be run simultaneously with RTA source inputs capable of being remotely switched on the fly. The 480 is fully programmable from the front panel, with the 480R remote control, or through a computer via the GUI port.
Crown MA-5002VZ
Used Price
AED 13,500

The Crown MacroTech 5002VZ packs an incredible 5000 watts into little more than five inches of vertical rack space. Crown's patented variable impedance (VZ) technology permits the MacroTech 5002VZ to dynamically adapt to both signal and load requirements in realtime. This provides the best power match to the widest range of loads. This innovative technology also creates the ability to pack large amounts of power into a compact package while achieving ultra-low distortion and without generating excessive heat.
The MacroTech 5002VZ also includes a number of additional features which expands its power and versatility. This includes additional user control over the VZ power supply which allows you to easily set the amplifier for maximum efficiency with your load.
2-OHM Dual (per channel) 2500W
4-OHM Dual (per channel) 2000W
8-OHM Dual (per channel) 1300W
4-OHM Bridge-Mono 5000W
8-OHM Bridge-Mono 4000W
Rane 2016
Used Price
AED 2,500



The MP 2016S is a rotary-controlled mixer featuring six Input Channels, Booth and House Outputs, Pre-Effects Tape Outputs, Post-Effects Tape Outputs with Level control, switchable Effects Loop, and Headphone Cueing. Input Channels 1 through 4 feature high quality RIAA phono preamplifiers which may be switched to line input via rear panel switches. Input Channels 5 and 6 each provide a balanced mic preamp with Input Gain trim, Mic/Line switch, two-band EQ, Mic Engage switch and an internal Booth Ducking enable jumper. In addition to the six dedicated preamplifiers, all six Input channels may select any of the five stereo Auxiliary Inputs.
The MP 2016S provides exceptional ergonomics, good feel and a clean, intuitive layout packaged in a compact 19 inch, 3U rack mount chassis, a scant five inches deep.
JBL VRX915S
Used Price
AED 4,500
The VRX915S is a compact, high power suspendable subwoofer system containing a 2265G-1 neodymium magnet, patented Differential Drive, 15" woofer in a front-loaded, vented enclosure. The VRX915S was designed specifically for use with the VRX928LA Line Array speaker and VRX-SMAF Array Frame. In addition it may also be used in setups consisting entirely of VRX915S subwoofers. The subwoofer system offers complete input connection flexibility for compatibility with a variety of cabling schemes. A recessed, external switch allows selection of either contacts +1/-1 or +2/-2 to be routed to the woofer.
JBL VRX918S
Used Price
AED 4,800

The VRX918S is a compact, high power suspendable subwoofer system containing a 2268H neodymium magnet, patented Differential Drive(R), 18 inch woofer in a front-loaded, vented enclosure.
Integral rigging hardware for simple connection of VRX932LA line-arrays and optional array frame.
18 inch, 2268H Differential Drive(R) woofer for extended low-frequency output

Power Rating: 800 W / 1600 W / 3200 W
Frequency Range: 31 Hz - 220 Hz
Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
Nominal Impedance: 8 ohms

JBL VRX 928 LA
Used Price
AED 4,800
The VRX928LA is a lightweight, compact 8" two-way line-array speaker system designed for use in arrays of up to six units. VRX928LA is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays such as JBL's VERTECor VRX932LA. The Constant Curvature waveguide mounts two compression drivers on a continuous arc. When additional VRX928LA speakers are added to the array the uninterrupted arc continues. In effect, all the drivers work together as if they were a single driver on a very long waveguide. Since there are two HF drivers in each VRX928LA speaker, the combined power handling and acoustic output of the system is far greater than a single driver could achieve. VRX928LA uses "amplitude shading" to shape the coverage of the array.
Power Rating: 400 W / 800 W / 1600W
Frequency Range: 57 Hz - 20 kHz (-10 dB)
Dimensions (H x W x D): 230 mm x 420 mm x 270 mm 9.0 in x 16.5 in x 10.5 in
Nominal Impedance: 8 ohms
JBL VRX 932 LA
Used Price
AED 7,500
The VRX32LA-1 is a compact 12" two-way line-array speaker system designed for use in arrays of up to six units. It is the ideal choice when line-array performance is needed. The Constant Curvature waveguide mounts two compression drivers on a continuous arc. When additional VRX932LA speakers are added to the array the uninterrupted arc continues. In effect, all the drivers work together as if they were a single driver on a very long waveguide. Since there are two HF drivers in each VRX932LA speaker, the combined power handling and acoustic output of the system is far greater than a single driver could achieve. VRX932LA uses "amplitude shading" to shape the coverage of the array.
Power Rating:  800 W / 1600 W / 3200 W
Frequency Range  :  57 Hz - 20 kHz (-10 dB)
Dimensions (H x W x D) :  343 mm x 597 mm x 376 mm
(13.5 in x 23.5 in x 14.8 in)
Crown XTI 1000
Used Price
AED 1,800

Crown’s XTi family of amplifiers defines the standard for portable PA systems with unmatched performance, technology and power-to-the-people affordability that delivers the goods night after night without even breaking a sweat. There’s no debate — when you choose Crown’s XTi Series, you’re choosing one of the most powerful and efficient amplifiers on the market today.
Innovations like integrated DSP that allows you to quickly and easily configure crossovers, EQ, limiting and delay, along with tools like a pink noise generator, subharmonic synthesizer, and universal tracking switch-mode power supply, which reduces power draw and waste heat. And as the first Crown amps to use Icepak™ thermal modeling software, they are at the top of their class when it comes to thermal efficiency and lightweight portability.
AC Line Current: XTi 1000: 6.5A

Stereo, 2 ohms (per ch.) 700W
Stereo, 4 ohms (per ch.) 500W
Stereo, 8 ohms (per ch.) 275W
Bridge-Mono, 4 ohms 1400W
Bridge-Mono, 8 ohms 1000W

Crown XTI 2000
Used Price
AED 2,550

Crown’s XTi family of amplifiers defines the standard for portable PA systems with unmatched performance, technology and power-to-the-people affordability that delivers the goods night after night without even breaking a sweat. There’s no debate — when you choose Crown’s XTi Series, you’re choosing one of the most powerful and efficient amplifiers on the market today.
Innovations like integrated DSP that allows you to quickly and easily configure crossovers, EQ, limiting and delay, along with tools like a pink noise generator, subharmonic synthesizer, and universal tracking switch-mode power supply, which reduces power draw and waste heat. And as the first Crown amps to use Icepak™ thermal modeling software, they are at the top of their class when it comes to thermal efficiency and lightweight portability.
AC Line Current: XTi 4000: 8.0A

Stereo, 2 ohms (per ch.) 1600W
Stereo, 4 ohms (per ch.) 1200W
Stereo, 8 ohms (per ch.) 650W
Bridge-Mono, 4 ohms 3200W
Bridge-Mono, 8 ohms 2400W

Crown XTI 4000
Used Price
AED 3,600

Crown’s XTi family of amplifiers defines the standard for portable PA systems with unmatched performance, technology and power-to-the-people affordability that delivers the goods night after night without even breaking a sweat. There’s no debate — when you choose Crown’s XTi Series, you’re choosing one of the most powerful and efficient amplifiers on the market today.
Innovations like integrated DSP that allows you to quickly and easily configure crossovers, EQ, limiting and delay, along with tools like a pink noise generator, subharmonic synthesizer, and universal tracking switch-mode power supply, which reduces power draw and waste heat. And as the first Crown amps to use Icepak™ thermal modeling software, they are at the top of their class when it comes to thermal efficiency and lightweight portability.
AC Line Current: XTi 2000: 6.9A

Stereo, 2 ohms (per ch.) 1000W
Stereo, 4 ohms (per ch.) 800W
Stereo, 8 ohms (per ch.) 475W
Bridge-Mono, 4 ohms 2000W
Bridge-Mono, 8 ohms 1600W

Items to follow shortly.....


COPYRIGHT © 2006-2008 ACCESS ALL AREAS LLC | ALL RIGHTS RESERVED.